numerical simulation

英 [njuːˈmerɪkl ˌsɪmjuˈleɪʃn] 美 [nuːˈmerɪkl ˌsɪmjuˈleɪʃn]

网络  數值模擬; 数值模拟方法; 数值模拟; 数值仿真; 数值模拟技术

化学



双语例句

  1. The coupling properties of EAST LHW launcher are analyzed by numerical simulation.
    采用数值模拟方法研究了EAST低杂波天线的耦合特性。
  2. The method of computer-aided alignment of unstable resonator is presented and its numerical simulation results are given.
    针对这一问题,对非稳腔的计算机辅助装调方法进行了研究,并对该过程进行了数值模拟。
  3. Field test data will be calculated with the theoretical and numerical simulation results were compared.
    将现场检测数据与理论计算以及数值模拟结果进行对比。
  4. According to the field test condition, the corresponding numerical simulation has been carried on.
    针对现场试验,进行了数值模拟。
  5. Numerical simulation and physical test show the validity of the method in power system oscillation characteristic analysis.
    通过仿真和动模试验验证了算法的有效性。
  6. Characteristics of wave propagation in grouted rockbolt were investigated with numerical simulation, experimental measurement and theoretical analysis.
    用理论分析、数值模拟和实验测试的方法研究了自由锚杆和锚固锚杆中的波传播特性。
  7. The numerical simulation analysis was verified by the continuous extrusion experiment.
    黄铜合金连续挤压成形实验验证了数值模拟分析结果。
  8. Principle and numerical simulation, prototype and parameters of system will be introduced.
    报道了测量原理和数值模拟结果、实验样机和系统技术参数。
  9. Numerical Simulation of Waves in Bohai Sea and Research on the Influence of Swells on Wind Waves
    渤海海浪的数值模拟和涌浪对风浪影响的研究
  10. For general engineering cases, a numerical simulation method is employed to perform the FRS analysis with correlative variables.
    对于工程中的一般情况,给出了可靠性灵敏度分析的数字模拟方法。
  11. Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
    通过数值模拟和实验方法,重点研究了换向时间对蓄热式均热炉能耗的影响。
  12. The model is applied to numerical simulation of tidal bore successfully.
    将本文建立的模型成功应用于涌潮的数值模拟中。
  13. As a practical example, the numerical simulation of mechanical characteristics for compact bone by homogenization method is introduced.
    作为应用实例,本文介绍了均匀化理论在密质骨力学性能的数值模拟中的应用。
  14. The conclusions obtained through numerical simulation have valuable reference to aseismic design of steel truss bridge.
    通过数值模拟得出了几点结论,对于钢桁架桥梁的抗震设计有一定的参考价值。
  15. By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
    应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
  16. The numerical simulation was used in the prediction and control of large turbine blades deformation.
    将数值模拟应用于大型水轮机叶片变形的预测与控制。
  17. Through numerical simulation and optimization analysis, the effect of underground mining on the surface movement and the seepage field are revealed.
    通过数值模拟和优化分析,揭示地下开采对地表岩移和渗流场的影响规律。
  18. By means of numerical simulation and experimental investigation, some comparison analysis of the different axial fan structure effects on performance was done.
    通过数值模拟和实验研究,对不同结构形式的轴流风机进行了对比分析。
  19. The importance of numerical simulation in the development of hydrocarbon reservoir is emphasized.
    强调了数值模拟技术在油气藏开发中的重要作用。
  20. Results from both theoretical derivation and numerical simulation prove that the proposed algorithm is correct.
    理论推导和仿真实验证明了所提算法的正确性。
  21. In this paper, through numerical simulation, reasonable layout of ventilation outlet and optimal configuration are researched.
    通过数值模拟,对机械排风口的合理布置位置和最佳配置方式进行了研究。
  22. Numerical simulation and experimental testing are used to study wave propagation characteristics in grouted rock bolt.
    采用数值模拟和实验模拟的方法对锚杆–锚固体系中的波动特征进行研究。
  23. The mathematical model experimental study about velocity field in a car-bottom heat treating furnace is carried out by using numerical simulation technology.
    利用数值模拟技术,对台车式热处理炉的速度场进行了数学模型实验研究。
  24. Numerical simulation analysis is carried out of the temperature field distribution to the frozen area roadbed.
    对冻土地区路基的温度场分布进行数值模拟分析,初步探讨了路基温度随时间和深度变化的关系。
  25. Recently mesh automatic generation technique is one of the key techniques of the numerical simulation.
    网格自动生成技术是目前数值模拟中的关键技术之一。
  26. The anisotropy coefficients of the uniaxial compressive strength and tensile strength of numerical simulation results are0.72 and0.24, respectively.
    数值模拟结果得出单轴抗压强度和抗拉强度的各向异性系数分别为0.72和0.24;
  27. Based on results of numerical simulation and requirements of the system on thermal effect and aperture, a reference size for applicable slab was given.
    根据数值模拟结果及系统对热效应和通光孔径的要求,给出了实际应用板条的参考尺寸。
  28. The results of numerical simulation and the demand of hardware resources are directly affected by the model and grids.
    模型的建立和网格的粗细直接影响着水轮机数值模拟的结果和对硬件资源的需求。
  29. The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.
    对CY-61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。
  30. The analysis of numerical simulation based on the theory of Fraunhofer of scalar diffraction was discussed.
    在标量衍射的夫琅和费原理上,进行了误差数值模拟分析及讨论。